Betco Corporation
Betco Hybrid Floor Finish
Safety Data Sheet
Shippable Product
640 fl oz (20 quart) - 1 Each - Long Lasting, Self-sealing, Styrene-free, Versatile, Powder Resistant - White
- Extended wear formula for longest-lasting shine possible
- 0.0% free of Styrene
- Versatile - low to frequent maintenance programs
- Self-sealing formation
- Helps retain floor gloss between burnishings - greatly reduces the need to frequently use a restorer in high-speed programs
General Information
Manufacturer
Betco Corporation
Manufacturer Part Number
660B500
Manufacturer Website Address
https://www.betco.com
Brand Name
Betco
Product Name
Hybrid Floor Finish
Marketing Information
Hybrid Floor Finish provides a long-lasting finish on all types of resilient tile flooring and properly prepared hard surfaces thanks to a revolutionary polymer system formulated with XBF technology. This self-sealing, extended-wear formula retains film integrity and outstanding gloss even after repeated detergent mopping and burnishing. It effectively reduces maintenance and prolongs the time between strippings. Specifically made for medium maintenance programs, this floor finish will retain its gloss between burnishings. In high-speed programs, it greatly reduces the need to frequently use a restorer.
Packaged Quantity
1 Each
Product Type
Floor Finish
Catalog
AAA Full Line Catalog
Catalog Page
NEW
Product Information
Cleaner Volume
640 fl oz (20 quart)
Composition
- Water
- Acrylic Polymer
- Ethoxydiglycol
- Tributoxyethyl Phosphate
- Glycol Ether
- Partially Fluorinated Alcohol
- Methylchloroisothiazolinone
- Methylisothiazolinone
- Wax
- Disodium 4,4'-bis(2-sulfostyryl)biphenyl, (E,Z)-
- Siloxane
pH
8.2 - 8.9
Recommended Use
- Wax Remover
- Finish Remover
- Soil Remover
Directions/Instructions
Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
RESTORATIVE MAINTENANCE: Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended. Note: This product is a self-sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a Betco sealer will enhance gloss and long term performance.
ROUTINE MAINTENANCE: Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE: Sweep large debris and dust mop. Top scrub the floor using Daily Scrub SC and maroon pad or equivalent to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above.
Please recycle empty containers. Note: Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum.
RESTORATIVE MAINTENANCE: Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended. Note: This product is a self-sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a Betco sealer will enhance gloss and long term performance.
ROUTINE MAINTENANCE: Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE: Sweep large debris and dust mop. Top scrub the floor using Daily Scrub SC and maroon pad or equivalent to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above.
Please recycle empty containers. Note: Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum.
Application/Usage
- Floor
- Hard Surface
Features
- Long Lasting
- Self-sealing
- Styrene-free
- Versatile
- Powder Resistant
Physical Characteristics
Color Family
White
Product Color
White
Miscellaneous
Recycled
No
Assembly Required
No
Country of Origin
United States
Checking for Also-Bought items, please wait...