Betco Hard As Nails Floor Finish
- Superior wearing for ultra-hard finish film; Resists dirt embedment for cleaner floors
- Nonscuffing, self-leveling and self-sealing; Low maintenance
- Use on all types of resilient flooring
- Bag-in-box packaging uses less plastic and resources - reduces waste by 75%, greenhouse gases by 52% and energy by 81%
- Equipped with spigot for quick, easy dispensing; no dead space and more compact so more efficient storage and transportation
![](http://content.ecinteractive.com/ecinteractive/CDN/images/spinner.gif)
This self-leveling, self-sealing floor finish uses highly durable, internally cross-linked polymers blended to achieve a harder floor finish film. Unique chemistry results in a high-gloss, long-wearing finish that cures faster and harder than any other metal-interlock finish. Hard film formula requires less maintenance and resists dirt embedment. It is the perfect labor-saving advantage for Educational and Retail facilities that have little or no time for floor burnishing. Use Hard As Nails Hard Film Floor Finish in bag-in-box packaging on all types of resilient tile (vinyl composition, vinyl, linoleum) and properly sealed hard surfaces (marble, terrazzo). It dries clear and has a mild fragrance. Spigot on bag-in-box allows quick, easy dispensing without heavy lifting, surging or glugging. Bag in box uses less plastic and resources and is more compact for more efficient transportation. When stacking, bag-in-box has no dead space for more efficient storage.
Directions for Use
Recommended for use on all types of resilient tile (vinyl composition, vinyl, linoleum) and properly sealed hard surfaces (marble, terrazzo).RESTORATIVE MAINTENANCE: Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures and humidity may extend dry time. 4 - 5 coats of finish are recommended. Note: This product is a self sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a sealer will enhance gloss and long term performance.
ROUTINE MAINTENANCE: Sweep large debris and dust mop (using a water-based treatment). Damp mop or automatic scrub using a neutral pH cleaner. Buff or burnish the floor as desired. The use of a cleaner/restorer is recommended to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE: Sweep large debris and dust mop (using a water-based treatment). Top scrub the floor using a top scrub cleaner and recommended floor pad to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above.
Note: Slip resistance meets or exceeds standard, (ASTM D 2047-04) James Machine 0.5 minimum.
- Multi Surface
- Multipurpose
- Self-Leveling
- Self-sealing
- Durable
- Dirt Resistant
- Non-scuffing
- Styrene-free
- Marking Resistant
- Powder Resistant
- Non-scratching
- Long Lasting