Betco Corporation
Betco Untouchable With SRT Floor Finish
Safety Data Sheet
Shippable Product
640 fl oz (20 quart) - Mild Scent - 1 Each - Self-sealing, Non-scuffing, Scuff Resistant, Low Odor, Black Mark Resistant, Durable, Detergent Resistant - White
- Superior protection for your floor and superior resistance to black heel marks
- Strong plastic bag sealed inside a 2-piece corrugated box with an easy-flow spigot for more efficient transportation, streamlined storage and easier use
- Extremely low odor
- Self-sealing for high effectiveness
- Easy to apply
General Information
Manufacturer
Betco Corporation
Manufacturer Part Number
606B500
Manufacturer Website Address
https://www.betco.com
Brand Name
Betco
Product Line
Untouchable
Product Name
Untouchable With SRT Floor Finish
Marketing Information
Untouchable with Scuff-Resistant Technology (SRT) is a low-odor, black heel mark-resistant floor finish that is an exceptional choice for those who want the highest gloss and wear with the least amount of labor. This low-maintenance floor finish is nonscuffing, durable, detergent-resistant and maintains its high gloss with minimal burnishing - a real labor saver. Excellent leveling and low odor make it easy to apply. It dries in 20 to 30 minutes. Untouchable is recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
Packaged Quantity
1 Each
Product Type
Floor Finish
Catalog
AAA Full Line Catalog
Catalog Page
NEW
Product Information
Cleaner Form
Liquid
Cleaner Volume
640 fl oz (20 quart)
Scent
Mild
Composition
- Water
- Acrylic Polymer
- Ethoxydiglycol
- Tributoxyethyl Phosphate
- Wax
- Glycol Ether
- C12-15 Alcohols Ethoxylated
- Siloxane
- Methylchloroisothiazolinone
- Methylisothiazolinone
- Partially Fluorinated Alcohol Surfactant
- 1,4-dioxane
pH
8.1 - 8.9
Directions/Instructions
Recommended for use on all types of resilient tile flooring and properly prepared hard surfaces.
RESTORATIVE MAINTENANCE:
Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco® stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended. Note: This product is a self-sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a Betco sealer will enhance gloss and long term performance.
ROUTINE MAINTENANCE:
Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco® One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE:
Sweep large debris and dust mop. Top scrub the floor using Daily Scrub SC and maroon pad to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above.
Please recycle empty containers. Note: Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum.
RESTORATIVE MAINTENANCE:
Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on Betco® stripper label. Floor surface must be clean, dry and free of residue before finish is applied. Rinse with clean water if necessary. Apply finish in uniform, thin to medium coats using a clean synthetic finish mop, microfiber mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20 - 30 minutes. Elevated temperatures, heavy coats and humidity may extend dry time. A minimum of 4 coats of finish is recommended. Note: This product is a self-sealing finish, however, if tile is old, worn or porous, initially applying 1 - 2 coats of a Betco sealer will enhance gloss and long term performance.
ROUTINE MAINTENANCE:
Sweep large debris and dust mop. Damp mop or automatic scrub using a Betco floor cleaner. Buff or burnish the floor to enhance gloss as needed. Use Betco® One Step High Speed Cleaner/Restorer to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE:
Sweep large debris and dust mop. Top scrub the floor using Daily Scrub SC and maroon pad to remove the top soiled layers of finish. Floor surface must be clean, dry and free of residue before finish is applied. Apply 1 - 2 coats of finish as directed above.
Please recycle empty containers. Note: Slip resistance meets or exceeds standard, (ASTM D 2047-11) James Machine 0.5 minimum.
Application/Usage
- Floor
- Hard Surface
- Tile
Features
- Self-sealing
- Non-scuffing
- Scuff Resistant
- Low Odor
- Black Mark Resistant
- Durable
- Detergent Resistant
Physical Characteristics
Color Family
White
Product Color
White
Miscellaneous
Recycled
No
Assembly Required
No
Country of Origin
United States
Checking for Also-Bought items, please wait...